3 ROW, SOLDER TOGETHER WITH SIDE FRAME. WO/ FRAME USE 239285. FOR FITS CAT 13, 15 ENGINES. BOTTOM HOSE CONNECTION ON LOWER LEFT ANDWO/ FRAME USE 239368; WITH BOTTOM HOSE CONNECTION ON LOWER LEFT AND W/ FRAME USE 239326. MUST VERIFY OUTLET POSITION BEFORE ORDERING
It has come to our attention that there is an installer issue when replacing our later model Freightliner Cascadia and Coronado radiators. On occasion, the installer is using the incorrect bolt lengths and not always reusing the washers and spacers required for mounting the Charge Air Cooler “CAC”, rock guard, and surge tank. WARNING: The correct length bolts must be used when mounting the CAC, rock guard (if equipped) and surge tank. In most cases, the CAC has three mounting bolts the same length and one longer bolt with rubber spacers (See Photo A Below.) The surge tank has one bolt that mounts through the radiator frame and has a spacer that must be used. Failure to properly install the correct bolt, washers, spacers, will cause the bolt to go through the frame and damage the side plate on the radiator. This places stress on the adjacent tube and will result in the tube failing.
BHTA9988, A9988, BHTD9546, D9546, BHTA9450, A9450, A0519870002, BHTC2315, C2315, 0520514001, U3698001, BHTE7236, E7236, A0519870017, DHTFR1306B0023, A0519870013, BHTA3562, A3562, BHTU3698001, U3692102, 2600177C1, BHTU3692002, U3692002, BHTA9986, A9986, A0534822000
239336
45
11
52
160
200
128130-03